Agilent Technologies PSA Series Manual page 256

Front-Panel Key and SCPI Command Reference
Measurement keys
Preset:
State Saved:
Range:
Example:
4.4.10.2.2 Avg Number
Sets the number that will be averaged. After the specified number (average counts) has been averaged, the
averaging mode (termination control) setting determines the averaging action.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Min:
Max:
Example:
4.4.11 Audio AC Level Measurement
There is only one view available for Audio AC Level measurement.There are two windows in this view:
Audio AC Level Numeric Results Window
•
Audio AC Level Settings Window
•
Table 4-31 Audio AC Level Numeric Results Window
Name
Audio AC Level
256
REP
Saved in instrument state.
Repeat | Exponential
:AUDF:AVER:TYPE EXP
:AUDF:AVER:TYPE?
MRECEIVE
Meas Setup
[:SENSe]:AUDFreq:AVERage:COUNt <integer>
[:SENSe]:AUDFreq:AVERage:COUNt?
[:SENSe]:AUDFreq:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:AUDFreq:AVERage[:STATe]?
25, ON
Saved in instrument state.
1
8192
:AUDF:AVER:COUN 10
:AUDF:AVER:COUN?
:AUDF:AVER:STAT OFF
:AUDF:AVER:STAT?
Corresponding Results
n=1 1st
Chapter 4