Viewing A License Key - Agilent Technologies PSA Series Manual

Introduction
Installing Optional Measurement Personalities
1. Press
this alpha editor to enter letters (upper-case), and the front-panel numeric keys
to enter numbers for the option designation. You will validate your option entry
in the active function area of the display. Then, press the
2. Press
validate your license key entry in the active function area of the display. Then,
press the
3. Press the

Viewing a License Key

Measurement personalities purchased with your instrument have been installed
and activated at the factory before shipment. The instrument requires a License
Key unique to every measurement personality purchased. The license key is a
hexadecimal number specific to your measurement personality, instrument serial
number and host ID. It enables you to install, or reactivate that particular
personality.
Use the following procedure to display the license key unique to your personality
option that is already installed in your PSA:
Press
Personality
whether the personality is licensed.
You will want to keep a copy of your license key in a secure location. Press
NOTE
System
shows the license numbers. If you should lose your license key, call your nearest
Agilent Technologies service or sales office for assistance.
36
, , ,
System More More Licensing
to enter the letters and digits of your license key. You will
License Key
key.
Enter
key.
Activate License
, , ,
System More More Licensing
key displays the personalities loaded, version information, and
, , then ,
More Licensing Show License
, to accesses the alpha editor. Use
Option
Enter
, The
Show License. System
, and print out a copy of the display that
key.
,
Chapter 1