Agilent Technologies PSA Series Manual page 216

Front-Panel Key and SCPI Command Reference
Measurement keys
Example:
4.4.5.3 Trace / View
Allows you to select the desired measurement view from the following selections:
Numeric results
•
Waveform result
•
Mode:
Key Path:
Preset:
State Saved:
Range:
4.4.5.4 Meas Setup
Displays the measurement setup menu for the FM Deviation Measurement when the FM Deviation
Measurement key has been selected in the Measure menu.
4.4.5.4.1 IF BW
Used to specify the IF BW, if the IF BW Type is set to Man.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Notes:
Example:
216
:DISP:FMD:WIND:TRAC:Y:COUP OFF
:DISP:FMD:WIND:TRAC:Y:COUP?
MRECEIVE
View/Display
NUMeric
Saved in instrument state.
Numeric results | Waveform result
MRECEIVE
Meas Setup
[:SENSe]:FMDeviation:BANDwidth|BWIDth <freq>
[:SENSe]:FMDeviation:BANDwidth|BWIDth?
1 MHz
Saved in instrument state.
1 kHz to 10 MHz
When IF BW Type is set to "AUTO", the measurement does not use this
value.
:FMD:BAND 1MHz
:FMD:BAND?
Chapter 4