Agilent Technologies PSA Series Manual page 374

N5531S Measuring Receiver Performance Verification
Performance Verification Tests
Table 8-6 Test Equipment
Instrument
3.5 mm (f) to 2.4 mm (f)
3.5 mm (f) to 3.5 mm (f)
Type N (m) to 3.5 mm (f)
2 or 3 required
Test Setup
Figure 8-2 Relative TRFL Measurement Test Setup
Test Procedure
1. See
connector torque settings are followed. SMA/ 3.5mm cable connectors are to
receive 8 inch-pounds of torque. All connections must be cleaned with alcohol.
2.
Preset
3. On the PSA, perform the
Now
374
Critical Specifications
(for this test)
For source output or PSA input on high
frequency models
For output of 20 GHz source or input to E4440A
opt BAB
For connection to fixed attenuators.
Also, if PSA has type N input connector, this
adapter is required
Figure 8-2. When connecting equipment, assure proper connector care and
the signal source and the PSA.
Auto Align
.
Recommended Model
Agilent 11901B
1250-1749
1250-1744
by pressing ,
System Alignments
,
Align All
Chapter 8