Example:
4.4.6.2.2.4 Scale Coupling
Allows you to toggle the scale coupling function between On and Off.
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Dependencies/
Couplings:
Notes:
Example:
4.4.6.3 Trace / View
Allows you to select the desired measurement view from the following selections:
Numeric Results
•
Demod Waveform
•
Mode:
Key Path:
Preset:
State Saved:
Range:
Chapter 4
:DISP:PMD:WIND:TRAC:Y:RPOS TOP
:DISP:PMD:WIND:TRAC:Y:RPOS?
Amplitude Y Scale
:DISPlay:PMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:COUPle
0|1|OFF|ON
:DISPlay:PMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:COUPle?
OFF
Saved in instrument state.
On|Off
See Restriction and Notes
Upon pressing the Restart front-panel key or Restart softkey under the Meas Control menu,
the scale coupling function automatically determines the scale per division and reference
values based on the measurement results if this parameter is set to On. When you set a value to
either Scale/Div or Ref Value manually, Scale Coupling automatically changes to Off.
:DISP:PMD:WIND:TRAC:Y:COUP OFF
:DISP:PMD:WIND:TRAC:Y:COUP?
MRECEIVE
View/Display
NUMeric
Saved in instrument state.
Numeric results | Waveform result
Front-Panel Key and SCPI Command Reference
Measurement keys
229