Power Meter - Agilent Technologies PSA Series Manual

Front-Panel Key and SCPI Command Reference
Front-Panel Keys

4.2.2 Power Meter

Accesses the menus for setting and performing calibrations for PSA and power meter.
4.2.2.1 Calibrate Power Meter
Calibrates the power meter.
Mode:
Key Path:
Remote Command:
Dependencies/Couplings:
Remote Command Notes:
Example:
4.2.2.2 Calibrate Power Meter State
Gets the state of power meter after being calibrated.
Mode:
Remote Command:
Remote Command Notes:
Example:
4.2.2.3 Power Meter Configuration
Accesses the menu to configure connection with power meter. This key is grayed out when current measurement
is one of the four Audio measurements.
4.2.2.3.1 Channel
Sets the channel for the specified hardware.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
130
MRECEIVE
System, More, More, Power Meter
:CALibration:PMETer:CALibrate
This key is grayed out when current measurement is one of the four Audio
measurements.
Global to the current mode.
:CAL:PMET:CAL
MRECEIVE
:CALibration:PMETer:CALibrate:STAT?
Global to the current mode.
:CAL:PMET:CAL:STAT?
MRECEIVE
System, More, More, Power Meter, Power Meter Config
:SYSTem:COMMunicate:PMETer:CHANnel:SELect A|B
:SYSTem:COMMunicate:PMETer:CHANnel:SELect?
A
Saved in instrument state.
Chapter 4