No Oscilloscope Or Power Meter? Try The Abus - Agilent Technologies 8719ET Service Manual

Start Troubleshooting Here
Source Check

No Oscilloscope or Power Meter? Try the ABUS

Monitor ABUS node 9.
Press the following:
PRESET: FACTORY
Preset
SERVICE MENU
System
Meas ANALOG IN Aux Input
Scale Ref AUTOSCALE
The display should resemble the
unexpected results, or if error messages are present, refer to
Troubleshooting."
Figure 4-6 0.25 V/GHz Waveform at Abus Node 9
4-20
Preset
ANALOG BUS ON
9 x1
Figure 4-6. If any of the above procedures provide
8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers
Chapter 7 , "Source
Service Guide