Table of Contents
Advertisement
Packet over SDH (POS)
Viewing POS Results
Viewing POS Results
Description
The POS results can be viewed in a variety of ways on the RESULTS page.
How To
1 Press the
2 Select
3
errors/counts and can be set up to be read as counts (total in measurement
interval) or ratios/rates.
4
occurred in total since the last time
5
occurred in the last measurement interval. This measurement interval is set up on
the results page when
field.
6
200
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key.
RESULTS
in the RESULTS field.
POS PAYLOAD
gives a summary of all possible POS measurements and
RESULT SUMMARY
errors give the number of errors and counts which have
CUMULATIVE
errors give the number of errors and counts which have
SHORT TERM
TIMING CONTROL
is used to look at POS alarms.
ALARM SECONDS
RUN/STOP
was pressed.
has been selected in the RESULTS
Advertisement
Table of Contents
