Agilent Technologies OmniBER 718 SDH User Manual page 82

Selecting Test Features
Dropping an External Payload/Test Signal
Drop 2 Mb/s/DS1 (Structured SDH Payload or Structured PDH
1 Connect the DEMUX port of the PDH module to the external equipment.
If 2 Mb/s connect to 75
Structured SDH Payload
2 Set up the required receive SDH interface see "Setting SDH Receive Interface "
page 49.
3 Set up the SDH structured payload, see "Setting Receive Structured Payload/Test
Signal " page 72.
4 Choose 2M PAYLOAD/DS1 PAYLOAD
5 Choose the LINE CODE.
Structured PDH
6 Set up, the required receive PDH interface, see "Setting PDH/DSn Receive
Interface (Option 012) " page 47.
7 Set up the PDH Test Signal interface, see "Setting Receive Structured Payload/
Test Signal " page 72
8 Choose 2M PAYLOAD/DS1 PAYLOAD
9 Choose the LINE CODE.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Ω
DEMUX port. If DS1 connect to 100Ω DEMUX port.
DROP 2 Mb/s
DROP 2 Mb/s
or .
DROP DS1
or .
DROP DS1
81