Table of Contents
Advertisement
Selecting Test Features
Using FEAC Codes
3 Choose the FEAC CODE TYPE.
4 Choose the MESSAGE from the choices displayed.
If you chose a DS1 message an additional field to the right of the DS1 MESSAGE
is displayed. Position the cursor on this field and choose
If you choose
1 to 28. Press
5 If
the range 1 to 15.
6 If
7 Choose TRANSMIT NEW CODE
FEAC message.
TIP:
To View FEAC Messages
The received FEAC message can be viewed on the
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
.
SINGLE CHANNEL
SINGLE CHANNEL
when finished.
END EDIT
is chosen, choose the REPEAT (TIMES) LOOP and MESS, in
LOOPBACK
is chosen, choose the BURST LENGTH (TIMES).
ALARM/ STATUS
or
ALL
use the EDIT keys to select a channel from
or
to transmit the selected
BURST
ON
RESULTS
display.
85
Advertisement
Table of Contents
