Table of Contents
Advertisement
Packet over SDH (POS)
Fully Exercising POS Hardware Architecture
Transmit an IP packet that generates maximum stress on the circuit under test.
An ideal way to generate the maximum stress on circuits under test is to transmit an
IP packet which has both a random packet size and gap. You can do this with the
OmniBER, and an example is given below.
How To
1 This procedure assumes you have already selected a POS payload on the MAIN
SETTING page, see "Setting up the Transmitter for POS Payloads" page 185.
2 Select the
folder.
POS SETTINGS
3 Set up the POS SETTINGS page, an example is given below.
206
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
