Table of Contents
Advertisement
8-22 Printer Head Cleaning Procedure
W A R N I N G
C A U T I O N
Static-safe
Work Station
Table 8-6. Static-Safe Accessories
Part Number
9300-0797
9300-0980
9300-1383
9300-1169
Printer Head Cleaning
Procedure
Lint from normal use of the printer may eventually col-
lect on the printer head and degrade print quality. Use
the procedure provided in this section to clean the
printer head.
This servicing procedure is for use by qualified
personnel only. To avoid electrical shock, do
not perform this procedure unless you are
qualified to do so.
Electrostatic discharge (ESD) can damage or destroy
the printer. Therefore, this procedure must always be
performed at a static-safe work station.
Figure 8-8 on page 8-23
safe work station using conductive table and floor mats
and wrist and heel straps. To ensure user safety, the
static-safe accessories must provide at least 1 MΩ of
isolation from ground. Refer to
tion on ordering static-safe accessories.
Description
3M static control mat 0.6 m
wire. (The wrist-strap and wrist-strap cord are not included. They must be
ordered separately.)
Wrist-strap cord 1.5 m (5 ft).
Wrist-strap, color black, stainless steel, without cord, has four adjustable
links and a 7 mm post-type connection.
ESD heel-strap (reusable 6 to 12 months).
shows an example of a static-
Table 8-6
×
×
1.2 m (2 ft
4 ft) and 4.6 cm (15 ft) ground
for informa-
Advertisement
Table of Contents
