Table of Contents
Advertisement
Selecting and Using "Other" Features
Setting Error Threshold Indication
Setting Error Threshold Indication
Description
When making error measurements, you can have an indication of when an error
count or error ratio threshold has been exceeded. You can set the OmniBER 718 to
indicate this by a color change, from yellow to red, of the bar on the
display and the result on the
which the color change occurs.
The Count and Ratio selections are independent.
This function is available on the
1 Choose COLOR ENHANCE RESULTS
HOW TO:
2 Choose the COUNT THRESHOLD and RATIO THRESHOLD.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
display. You can choose the thresholds at
RESULTS
OTHER
COLOR CONTROL
.
ON
GRAPH
display.
315
Advertisement
Table of Contents
