Table of Contents
Advertisement
Storing, Logging and Printing
Logging Results
and how to setup the instrument to interface with them please refer to the following
sections:
• RS232: "Logging Results to RS-232-C Printer" page 270.
• GPIB: "Logging Results to GP-IB Printer" page 268
• PARALLEL: "Logging Results to Parallel (Centronics) Printer" page 267.
• DISK: "Saving Data Logging to Disk" page 294.
• INTERNAL (only if Option 602, Internal Printer, is fitted): "Logging Results to
Internal Printer" page 269.
Enabling Test Period Logging
To enable Test Period Logging first select the
then set TEST PERIOD LOGGING to be
the actual Test Period (ie Gating Period) please refer to the "Test Timing" page 111
Section.
Selecting Logging Content
The SETUP
LOGGING CONTENT
display allows the user to choose which type of results they wish to log. For
example if they only wished to log the G.821 and G.826 Analysis Results then they
would simply set LOG G.821 RESULTS and LOG G.826 RESULTS to be
while setting all the other selections to be
254
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
OTHER
LOGGING
. For more information on setting up
ON
selection on the
OTHER
LOGGING
There is no restriction as to what
OFF
.
display and
ON
Advertisement
Table of Contents
