Table of Contents
Advertisement
Packet over SDH (POS)
Throughput Testing
To Transmit a packet rate of 2995200 packets/second
The following procedure shows how to set up the OmniBER to generate a packet
stream of 75-byte IP packets with a 17-byte gap between packets and with a packet
rate of 2995200 packets/s.
How To
1 Press the
2 Select the
POS payload selected.
3
4 Set the SETUP field to
5 Select a fixed word pattern as the payload (AA55 for this example).
210
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
TRANSMIT
key and select
MAIN SETTINGS
Select the
POS SETTINGS
IP PAYLOAD
SDH
.
folder and set up the page as shown below, with a
folder.
Advertisement
Table of Contents
