Table of Contents
Advertisement
Making Measurements
Making SDH Analysis Measurements
Making SDH Analysis Measurements
Description
G.826, M.2101, M.2110 and M.2120 analysis results are provided for all relevant
SDH error sources.
In addition the following results are provided:
Cumulative error count and error ratio
Short Term error count and error ratio
Alarm Seconds
Frequency and Optical Power
Pointer values and pointer adjustment counts
Pointer Graph. See, "Using Pointer Graph Test Function " page 95.
1 Set up the receive SDH interface and payload required. See "Setting SDH
HOW TO:
Receive Interface " page 49.
2 If required set up the SDH transmit interface and payload. See "Setting SDH
Transmit Interface " page 29.
3 Press
4 You can view the analysis results on the
TIP:
The measurement will not be affected if you switch between the different results
provided.
114
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
to start the measurement.
RUN/STOP
SDH ANALYSIS
RESULTS
display.
Advertisement
Table of Contents
