Setting Up The Receiver For Pos Operation - Agilent Technologies OmniBER 718 SDH User Manual

Packet over SDH (POS)

Setting up the Receiver for POS Operation

Setting up the Receiver for POS Operation
Description The receiver rate and mapping can be set up to match the requirements of the
equipment under test. For SDH, select a rate from STM-0 to STM-16 Optical.
TIP
To set the Transmitter and Receiver to the same interface settings choose
SETTINGS CONTROL COUPLED
the same settings as the transmitter.
How To
1 Press
2 Select the
3 Select the SIGNAL rate.
4 Select required MAPPING with POS as a payload.
As an alternative, use
cursor keys to navigate through the popup application diagram (see next page).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
. This causes the receiver to be configured to
and select
SDH
RECEIVE
folder.
MAIN SETTINGS
SET
to bring up the popup application diagram. Use the
.
OTHER
197