Table of Contents
Advertisement
Storing, Logging and Printing
Changing Internal Printer Paper
Changing Internal Printer Paper
Description Option
The printer accepts rolls of thermal paper with the following dimensions: :
602 is required
Width:
Maximum Outside Diameter:
Inside Core Diameter:
Suitable rolls of paper are available from Hewlett Packard, Part Number 9270-1360.
WA RN IN G
The paper tear-off edge is SHARP. This edge is exposed when the printer cover
is raised. Note the
1 Raise the two locking tabs on the sides of the printer cover and then raise the
HOW TO:
cover.
2 Raise the printer mechanism front cover. This releases the paper drive. Remove
any remaining paper from the front (in the normal direction of operation).
3 Lift out the spindle. Adjust the paper width adaptor to the width of the paper being
used.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
216 mm (8.5 in) or 210 mm (8.27 in) (A4)
tolerance +2.0 mm - 1.0 mm
40 mm
Between 12.5 mm and 13.2 mm
CAUTION SHARP EDGE label on the cover.
!
LIFT TO ADJUST PAPER ALIGNMENT
273
Advertisement
Table of Contents
