Table of Contents
Advertisement
Selecting Test Features
Setting Transmit Structured Payload/Test Signal
Setting Transmit Structured Payload/Test Signal
Description
Structured PDH Payload/Test Signal settings determine the SDH payload or the
PDH test signal to be tested and set any background (non test) conditions to prevent
alarms while testing.
TIP:
If you wish to set the OmniBER 718 transmitter and receiver to the same Payload
settings, choose
1 Choose the required TEST SIGNAL rate. If Nx64 kb/s is chosen, see "Setting
HOW TO:
Transmit N x 64 kb/s/N x 56 kb/s Structured Payload/Test Signal " page 73.
2 Choose the PAYLOAD framing pattern.
If the TEST SIGNAL chosen was 2Mb/s, the
to PAYLOAD menu. See "Inserting an External PDH/DSn Payload/Test Signal "
page 76.
3 Choose the test tributary in the structured payload, under 34Mb, 8Mb, 2Mb, 64
kb/s or DS2, DS1.
4 Choose the PATTERN type and PRBS POLARITY.
70
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
OTHER
SETTINGS CONTROL COUPLED
.
choice is added
INSERT 2 Mb/s
Advertisement
Table of Contents
