Table of Contents
Advertisement
ATM Operation
Measuring ATM Delay Performance
How to
1 Set up the
Payloads " page 154.
2 Select TEST CELL as the transmit and receive payload as shown above.
3 Select RESULTS and view the Delay and CDV results, an example is given
below.
Note: Delay measurements such as mean cell transfer delay are only valid if you
perform a round trip measurement, that is, when a transmitter and receiver are in the
same instrument. You can perform a CDV measurement end to end, that is, using
two separate instruments to transmit and receive.
178
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
page for ATM see "Setting up the Transmitter for ATM
TRANSMIT
Advertisement
Table of Contents
