Table of Contents
Advertisement
Packet over SDH (POS)
Continuity Test
4 Select the
folder.
POS SETTINGS
5 Set the SETUP field to
and select a suitable payload, for this
IP PAYLOAD
example we have chosen a 2^23-1 PRBS as shown below.
Check continuity by adding POS errors and verifying that the correct alarms and
errors are received by the OmniBER.
6 Select the
folder and set up as shown below.
TEST FUNCTION
213
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
