Setting the Interfaces
Setting Extended Jitter Receive Interface
Setting Extended Jitter Receive Interface
Description:
These measurements are made at the upper end of the standard wander frequency
Option 200 required
range and the lower end of the standard jitter frequency range. The extended jitter
for Jitter.
receive interface is selected with
SDH
The choices made on the jitter receive interface determine the threshold level for
determining a jitter hit. The measurement Range and the Filters are not selectable.
HOW TO:
1 Choose MEASUREMENT TYPE
2 Choose the HIT THRESHOLD level - if the received jitter exceeds the value
chosen a jitter hit is recorded.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RECEIVE
MEASUREMENT TYPE
JITTER
or
PDH/DSn JITTER
EXTENDED
.
EXTENDED
.
RECEIVE
51