Table of Contents
Advertisement
Storing, Logging and Printing
Logging Results
result selection is made but please note that the selections all default to be
that all results are logged by default.
When TEST PERIOD LOGGING is set to
SECONDS selection on the SETUP
ERROR SECONDS to be
Period, then a timed and dated message is logged each time an error second occurs.
The message will contain the type of error detected and the number of errors of that
type which were received in the error second. Note that if there are excessive
occurences of error seconds during a Test Period then having this selection switched
will result in heavy use of printer paper.
ON
Selecting Logging Period
As well as logging results at the end of the Test Period, the user can also select a
logging period. The logging period is setup via SETUP
the
OTHER
results will be logged. Note that this selection is only offered when TEST PERIOD
LOGGING is set to
The length of the logging period is setup using the LOGGING PERIOD selection.
This offers a number of preset intervals along with a USER PROGRAM choice
which provides a choice of 10 minutes to 99 hours. The actual logging period
chosen by the user should be of a shorter duration than the test period in order that
results can be logged periodically within the test period.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
LOGGING CONTENT
means that, if errors are detected during the Test
ON
display. At the end of each of these logging periods
LOGGING
ON
.
then there is a LOG ERROR
ON
display. Setting LOG
LOGGING PERIOD
so
ON
on
255
Advertisement
Table of Contents
