Table of Contents
Advertisement
Selecting Test Features
Setting Receive Structured Payload/Test Signal
Setting Receive Structured Payload/Test Signal
Description
Structured PDH Payload/Test Signal settings determine the SDH payload or the
PDH test signal to be tested.
TIP:
If you wish to set the OmniBER 718 transmitter and receiver to the same Payload
settings, choose
.
1 Choose the required Test Signal rate. If N x 64 kb/s or N x 56 kb/s is chosen, see
HOW TO:
page 75.
2 Choose the Framing pattern of the PAYLOAD.
If 2 Mb/s TEST SIGNAL is chosen,
3 Choose the test tributary within the structured payload, under 34Mb, 8Mb, 2Mb,
64 kb or DS2, DS1.
4 Choose the PATTERN type and PRBS polarity.
72
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
OTHER
SETTINGS CONTROL COUPLED
"Setting Receive N x 64 kb/s/N x 56 kb/s Structured Payload/Test Signal "
See "Dropping an External Payload/Test Signal " page 79.
is added to the menu.
DROP 2 Mb/s
Advertisement
Table of Contents
