Using Instrument and Disk Storage
Copying Graphics Results from Instrument Store to Disk
Copying Graphics Results from Instrument
Store to Disk
Description
You can copy Graphics Results from the instrument store to the Disk. This is useful
under the following conditions:
• If you have graphics results stored in the instrument that you wish to prevent from
being overwritten by a future measurement (only 10 store locations in the
instrument)
• If you wish to retrieve the graphics results for viewing via a spreadsheet.
HOW TO:
1 Choose the directory to receive the graphics file. See "Accessing Directories and
Files " page 284.
2 Choose DISK OPERATION
Instrument Store number using
press
3 Enter the filename the graphic results are to be copied to using
pop-up keypad.
The file name can contain up to 8 alphanumeric characters.
The filename extension is fixed as .SMG.
302
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SET
and use the pop-up keypad
PREVIOUS CHAR NEXT CHAR
FILE COPY GRAPHICS
and
DECREASE DIGIT
INCREASE DIGIT
.
or press
SET
and enter the
or
twice and use the