Table of Contents
Advertisement
Packet over SDH (POS)
Channelized Testing
5 Select required MAPPING with POS as a payload.
SET
Use
way of selecting the appropriate mapping. Use the cursor keys to navigate
through the popup application diagram.
6 Select the channel under test.
The figure below gives an example where the channel under test is STM-1(9) in
an STM-16 signal.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
to bring up the popup application diagram. This allows an alternative
203
Advertisement
Table of Contents
