Agilent Technologies OmniBER 718 SDH User Manual page 47

Setting the Interfaces
Using Smart Test
To run a POS Smart Test
1 Ensure a valid signal is connected to one of the instrument's Receive ports.
2 Press
SMART TEST .
3 Use the down cursor control key to select POS Setup/Tests.
4 Use the right cursor control key to access the setups/tests.
5 Use the down cursor control key to select required setup/test.
6 Press
to display the required Setup screen Or press to exit
CANCEL
SELECT
.
Smart Tests.
46
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com