Table of Contents
Advertisement
Setting the Interfaces
Using Smart Test
Using Smart Test
Smart Setup
The Smartsetup feature simplifies instrument operation by:
Allowing the instrument to auto-configure on the incoming signal. It will attempt to
identify signal structure and detect mixed payload signal structures and alarms.
The OmniBER 718 automatically displays all of the J1 trace identifiers. Once the
received signal has been identified you can select a channel of interest and explore
further into the payload.
Smart Tests
Allows you to quickly access the most commonly used instrument features such as:
1 Connect the OmniBER 718 to the network and choose if necessary the required
HOW TO USE
SMARTSETUP:
SDH
SDH/SONET, but can not select between SDH and SONET).
2 Press
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
• Signal quality
• Functional tests
• Jitter tests
• ATM tests
• Settings (stored, logging, Tx/Rx coupling and trigger output enable)
RECEIVE
interface on the OmniBER 718 (Smartsetup will select PDH or
.
SMART TEST
41
Advertisement
Table of Contents
