Table of Contents
Advertisement
Setting the Interfaces
Setting Jitter Transmit Interface
Setting Jitter Transmit Interface
Description:
You can add jitter to the transmitted PDH/DSn or SDH signal at 2 Mb/s,
Option 200 required
8 Mb/s, 34 Mb/s, 140 Mb/s, DS1, DS3, STM-0, STM-1, STM-4 and STM-16. Jitter
for Jitter and option
modulation can be sourced internally or from an external source. Jitter measurement
012 for PDH.
up to 2.5 Gb/s is also available when ATM is selected as a payload.
1 If you are adding jitter to the PDH signal, set up the PDH transmit interface. See
HOW TO:
"Setting PDH/DSn Transmit Interface (option 012) " page 26.
2 If you are adding jitter to the SDH signal, set up the SDH transmit interface. See
"Setting SDH Transmit Interface " page 29.
3 Choose JITTER/WANDER
If you wish to add wander to the PDH or SDH signal, see "Setting Wander
Transmit Interface " page 36.
4 Choose JITTER
If you wish to perform a Jitter Tolerance measurement, choose
If you wish to perform a Jitter Transfer measurement choose
34
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
JITTER
.
ON
. See "Measuring Jitter Tolerance" page 137.
AUTO TOLERANCE
. See "Measuring Jitter Transfer " page 142.
TRANSFER FUNCTION
.
Advertisement
Table of Contents
