Making Measurements
Measuring Optical Power
Measuring Optical Power
Description
Optical power measurement can be performed on the SDH signal connected to the
IN port of the Optical Interface module.
HOW TO:
1 Connect the SDH optical signal to the IN port of the Optical Interface module.
2 Choose the received input signal rate on the
3 To view Optical Power results select
twice then select
N O T E
1. Optical power measurement is always available even if test timing is off.
2. The white portion of the coloured bar shows the power range for accurate jitter
measurement (only displayed if a jitter option is fitted). The green portion of the
coloured bar shows the power range for accurate BER measurement.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RECEIVE
RESULTS
.
OPTICAL POWER
display.
SDH
, press
SDH RESULTS
MORE
117