Table of Contents
Advertisement
Storing, Logging and Printing
Changing Internal Printer Paper
4 Put the paper roll on the spindle such that the sensitive side (slightly shiny) will
be on the underside of the print mechanism. Ensure that the relocation of the
spindle locks the blue width adaptor in position.
N O T E
The paper must be installed such that when it is in the print mechanism, the sensitive
side (slightly shiny) is the underside.
The illustrations here show the correct fitting for HP 9270-1360 paper which has the
sensitive side on the outside of the roll.
5 Feed the paper into the upper entry of the print mechanism. When the front cover
of the print mechanism is closed, the printer should automatically feed the paper
through until there is approximately 2.5 cm (1 in) clear at the front of the print
mechanism.
CA UTI O N
Do not close the outer cover until the automatic paper feed is complete.
274
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SET BLUE ADAPTOR A4 LEFT - 8.5in RIGHT
Align paper with the leftmost edge of the printer
mechanism slot
INSERT PAPER
Advertisement
Table of Contents
