Table of Contents
Advertisement
Selecting Test Features
Adding Errors & Alarms at the SDH Interface
Adding Errors & Alarms at the SDH Interface
Description
Errors and alarms can be added on the SDH signal during testing.
HOW TO:
1 Set up the SDH transmit interface and payload required. See "Setting SDH
Transmit Interface " page 29.
2 Select
3 Choose the ERROR ADD TYPE and RATE required.
Errors can be added at preset rates and at USER programmable rate. With the
exception of ENTIRE FRAME, A1A2 FRAME and BIT, errors can be added at
ERROR ALL rate.
If B2 BIP errors are chosen errors can be added to trigger an MSP THRESHOLD.
This takes the form of N errors in T time period. N and T are both selectable.
4 Choose the ALARM TYPE
Errors and Alarms can be added at the same time.
82
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SDH, ERR & ALARM as shown above.
TEST FUNCTION
,
Advertisement
Table of Contents
