Agilent Technologies OmniBER 718 SDH User Manual page 78

Selecting Test Features
Inserting an External PDH/DSn Payload/Test Signal
Insert 2 Mb/s or DS1 (Unstructured SDH/SONET Payload)
1 Connect the external payload to the MUX port of the PDH Transmit module.
If 2 Mb/s connect to 75
2 Set up the required transmit SDH interface, and choose TU12 MAPPING or
TU11 MAPPING and TU PAYLOAD
Insert 2 Mb/s or DS1 (Structured SDH Payload or Structured PDH)
1 Connect the external payload to the MUX port of the PDH Transmit module.
If 2 Mb/s connect to 75
Structured SDH Payload
2 Set up the required transmit SDH interface. See "Setting SDH Transmit Interface
" page 29.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Ω
MUX port. If DS1 connect to 100Ω MUX port.
INSERT 2 Mb/s
Ω
MUX port. If DS1 connect to 100Ω MUX port.
or .
INSERT DS1
77