Table of Contents
Advertisement
Selecting Test Features
Setting up Signaling Bits
HOW TO
Transmit a DS1 payload signal with user-defined signaling bits
PDH Operation
1 Choose
2 Choose SIGNAL
the
3 Choose TEST SIGNAL
4 Set the A,B bits (for D4 and SLC-96) and A,B,C,D bits (for ESF) as required.
SDH Operation
1 Choose
2 Set MAPPING to TU-12.
3 Choose MAPPING
PAYLOAD
4 Choose TEST SIGNAL
5 Set the A,B bits (for D4 and SLC-96) and A,B,C,D bits (for ESF) as required.
6 Floating Byte DS1 selection: Set the ABCD bits for NO-F-BIT or ESF framing
and/or the AB bits for D4 TU PAYLOAD framing as required.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
on the
PDH/DSn
TRANSMIT
or
DS1
DS3
display
MAIN SETTINGS
56 kb/s
display.
SETTINGS
on the
TRANSMIT
SDH
FL BYTE DS1
STRUCTURED
proceed to step 5.
FL BYTE DS1
56 kb/s
display
SETTINGS
.
display.
, and PAYLOAD TYPE
or
on the
Nx56 kb/s
STRUCTURED
display.
,
or
ASYNC DS1
on the
display. If you choose
MAIN SETTINGS
or
on the
Nx56 kb/s
STRUCTURED
on
STRUCTURED
and TU
DS3
69
Advertisement
Table of Contents
