Dxi4700 Hard Drive Carrier Indicators - Quantum DXi4700 User Manual

Chapter 2: Basic Operations

DXi4700 Hard Drive Carrier Indicators

DXi4700 Hard Drive Carrier Indicators
Each DXi4700 drive carrier in the Node module has two LED indicators (see
LED Indicator
Drive activity indicator (green)
Drive status indicator (green and amber)
Note: If a drive fails, you will be notified by a service ticket in the remote management console (see
Service Tickets on page
Caution: Do not remove a drive that has not failed. Instead, only remove a drive that has failed. If you
accidentally remove a good drive, wait 30 seconds before reinserting the drive.
Figure 29: DXi4700 Drive Carrier LEDs
1 - Drive activity indicator (green) 2 - Drive status indicator (green and amber)
Quantum DXi4700 User's Guide
183).
Figure 29
Activity
Flashing - Indicates hard disk drive activity.
l
Off - Drive ready for insertion or removal
l
Note: The drive status indicator remains off until
all drives are initialized after system power is
applied. Drives are not ready for insertion or
removal during this time.
Blinks green two times per second - Identify
l
drive/preparing for removal
Blinks green, amber, and off - Drive predicted
l
failure
Blinks amber four times per second - Drive failed
l
Blinks green slowly - Drive rebuilding
l
Steady green - Drive online
l
Blinks green three seconds, amber three
l
seconds, and off six seconds - Rebuild aborted
below):
52