Using The Ocp (Operator Control Panel); Home Screen - Quantum px720 User Manual

Using the OCP (Operator Control Panel)

Home Screen

Quantum PX720 User's Guide
2 Verify that the OCP display indicates "Off-line" from the
screen.
3 Verify that the CHM (robotic arm) is empty.
If there is a tape cartridge in the CHM, perform a
place the cartridge in an available slot.
4 Turn off the power switch located on the front of the library (see
figure 32).
The OCP is located on the front of the library. The menus on the OCP
allow you to obtain information about the library, execute library
commands, and test library functions. Before using the OCP to perform
library functions, familiarize yourself with the:
• Home Screen
• OCP Buttons
• Library Status and Attention Messages
The first screen the OCP displays after library initialization is the main
2
screen. This screen displays library status and provides information on
the number of tape drives, slots, and library name (see
Chapter 2 Basic Library Operations
Using the OCP (Operator Control Panel)
Move
figure
Operations
command to
33).
53