Installing The H810/H830 Raid Controller - Quantum DXi4700 Upgrade Manual

Figure 19 Replacing the
Cooling Shroud
Installing the H810/
H830 RAID Controller
Table 5 DXi4700 RAID
Controller Configurations
Installing Components in the Node
Cooling shroud
b Lower the cooling shroud into the chassis until it is firmly seated.
Note: For proper seating of the cooling shroud in the chassis, ensure that
the cables inside the system are routed along the chassis
The PERC H810 RAID controller (DXi4700 G1) or PERC H830 RAID controller
(DXi4700 G2) allows you to connect up to three Expansion modules to the
DXi4700 Node (see Table
RAID controller card in PCIe slot 6, located in expansion card riser 3 (see
Figure 20 for DXi4700 G1 and for DXi4700 G2).
Expansion
DXi4700 Modules
Capacity (JBODs)
5 TB 0
11 TB
19 TB
27 TB
45 TB 1
63 TB
81 TB 2
99 TB
117 TB 3
135 TB
Quantum DXi4700 Capacity Upgrade Guide
5). If required for the upgrade, install the H810/H30
RAID Controller
• None
• H810 RAID controller card in PCIe slot 6
(DXi4700 G1)
• H830 RADI controller card in PCIe slot 6
(DXi4700 G2)
6-68107-03 Rev C
December 2016
23