Removing/Installing Removable Bin Packs; Table 18 Load Port Bin Pack Types - Quantum px720 User Manual

Removing/Installing
Removable Bin Packs
Table 18 Load Port Bin Pack
Types
Quantum PX720 User's Guide
2 Open the load port through the OCP load port screen (see
Screen on page 72).
Caution:
3 With the load port door open, place the tape cartridges in any
available load magazine slot.
The proper orientation for tape cartridge insertion is shown in
Cartridges
4 Manually close the load port door by pushing the load port assembly
into the cabinet. You will hear a "click" when it locks into position.
Both the left and right load ports on the front of the PX720 can have either
2
fixed or removable bin packs. These bin packs can support both SDLT
and LTO tape cartridges (see
SDLT Fixed
Bin Packs
8 slots per pack
(2 on left load
port, 4 on right
load port)
To remove/install a removable bin pack:
1 Press down on the bin pack handle to release bin pack from the load
port and tip the bin pack out of the load port (see
Inserting Tape Cartridges into the Load Port
Ensure the load port doors are open prior to unlocking
the load ports.
on page 44 and LTO Cartridges
table 18).
LTO Fixed Bin
Packs
9 slots per pack
(2 on left load
port, 4 on right
load port)
Chapter 2 Basic Library Operations
on page 45.
SDLT LTO
Removable Removable
Bin Packs Bin Packs
7 slots per pack 8 slots per pack
(2 on left load (2 on left load
port, 4 on right port, 4 on right
load port) load port)
figure
Load Ports
SDLT
47).
83