Bottom Cover Plate
Removing the Bottom Cover Plate will expose the Duplex Controller Board, the fan,
the two motors, five sensor switches, three belts, and the door solenoid.
To remove the Bottom Cover Plate:
1.
Remove the Front Cover Assembly (page 5-122).
2.
Turn the Duplex unit over so that the bottom plate is facing up.
3.
Remove four black screws (self-tapping, 10 mm) and one silver screw (metal,
10 mm) fastening the plate to the chassis.
4.
From the front end of the assembly, remove two black screws (self-tapping,
10 mm) from the folded end of the bottom plate.
5-124
Phaser 7400 Color Printer Options Service Manual