Wireless Mode - Lutron Electronics GRAFIK Eye QSGRJ-4P Programming Addendum

Wireless Mode

By default, the GRAFIK Eye QS Wireless control unit's wireless
feature is in Setup Mode. In this mode, the GRAFIK Eye
QS Wireless control unit will respond to any programming
commands from other nearby Lutron QS wireless (and
compatible) products.
After associating other wireless devices to the GRAFIK Eye
QS Wireless, you may wish to prevent additional devices from
communicating with it. To do this, change the wireless mode to
"Locked Mode".
1. Press and hold the top and bottom
Main menu
scene buttons to enter programming
Shade labels
mode (see illustration at right).
2. Use the master buttons to highlight
Wireless Mode
"Wireless Mode" and press the
OK button to accept.
3. Use the master buttons to highlight
Wireless Mode
"Locked Mode" and press the OK button
to accept.
Locked Mode
4. The info screen will display a confirming
"Saved" message.
5. Press and hold the top and bottom
scene buttons to exit programming
mode.
Saved
Saved
R
Wireless System Programming
1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 16
9-16
1-8
OK
GRAFIK Eye QS Wireless System Programming 
®
Master
buttons
OK
button
Press and hold the
top and bottom
scene buttons
to enter or exit
programming mode.