Timeclock Operation; Set Time And Date - Lutron Electronics GRAFIK Eye QSGRJ-3P Installation And Operation Manual

Timeclock Operation

Set Time and Date

1. Enter programming mode (see page 15).
Main menu
2. Use the Master buttons to highlight "Timeclock" and press the
Timeclock
Timeclock
OK button to accept.
Scene setup
3. Use the Master buttons to highlight "Time & date" and press
the OK button to accept.
4. Use the Master buttons to highlight either "12 Hr" or "24 Hr"
Timeclock
format for time display and press the OK button to accept.
5. Use the Master buttons to highlight the current hour and press
End afterhours
the OK button to accept. Repeat for the current minutes.
Time & date
6. Use the Master buttons to highlight the current year and press
the OK button to accept. Repeat for the current month and
date.
Set format
7. The info screen will confirm that your time and date have been
saved.
Del: 00
12 Hr
8. Exit programming mode (see page 15).
Set time
: 00 AM
08
Set time
08 : AM
30
Set date
Set date
Del: 00
2009
®
1
Set date
March
17
2 3 4 5 6
Saved
GRAFIK Eye
OK
QS Installation and Operation Guide 35
®
Master
buttons
OK
button