Creating Parameter Snapshots Using Lock - Native Instruments Maschine Jam Manual

2. Press and hold the
3. Put your finger on the Smart Strip and slide it upwards to increase the parameter, or slide
it downwards to decrease the parameter.
4. Release the AUTO
Once you release the
→
cally replicated during playback.
Deleting Automation
Automation can be deleted at any time.
To delete your automation:
1. Select the channel (Master, Group or Sound) containing the automation.
2. Press SHIFT + ATUO
The automation is deleted and the pattern will play normally.
→
For detailed information on automation, refer to the MASCHINE Software Manual available
from the Help menu.
8.6

Creating Parameter Snapshots using Lock

Allows you to create up to sixty-four snapshots, with each snapshot containing every modulata-
ble parameter in your project, including your Solo and Mute assignments. You can switch be-
tween these instantly, or morph between them synchronized to the tempo. This is a nice tool
for extensive modulations, but also very useful to compare mixes, or to switch up snapshots
during a live performance.
Represented by up to sixty-four illuminated click-pads on the 8x8 matrix, snapshots can be
created or recalled at any time from the controller. Snapshots can also be, overwritten or
cleared allowing you to organize them ready for your live set.
Creating a Snapshot
To create a Lock snapshot:
AUTO button.
button once you are satisfied with the sound.
AUTO button, the changes you made to the parameter are automati-
+ CLEAR.
Mixing your Project
Creating Parameter Snapshots using Lock
MASCHINE JAM - Manual - 143