Loading Cut Sheet Paper (Bypass); Switching Between Trays - Xerox Wide Format IJP 2000 User Manual

1.5.2

Loading Cut Sheet Paper (Bypass)

When using cut sheets for print, load the cut sheet via the bypass (manual) feed table.
When loading paper of different type, size, or weight, change the paper settings before printing. For information

Important
on how to do this, refer to "1.6 Configuring Paper Setting" (p. 43).
Paper of up to 78.7 in. (2,000 mm) in length can be loaded.

Note
Steps
1.
Align both edges of the paper against the scale, and insert the
paper until it is conveyed automatically.
The paper is automatically conveyed and stops.
Load paper one sheet at one time.

Important
If paper is curled, hold the curled corners with both

hands when inserting the paper.
Do not release your hands from the paper until it is

conveyed. If you release your hands when you hear a
sound, the paper may get jammed.
It is convenient to use the optional manual feeder guide when loading paper into the bypass (manual)

Note
feed table.
1.5.3

Switching Between Trays

When the selected tray has run out paper, you can manually switch to another tray to continue printing.
Steps
1.
Press [Source].
Select a paper tray that contains paper of which the

Important
size is larger than the print size. If you select a tray that
contains paper of which the size is smaller than the
print size, it causes the machine inside to get dirty.
2.
Select the paper tray you want to use, and press [Close].
Printing is resumed.
1.5 Loading/Replacing Paper
1
41