Before Using the Machine
11. Remove the trimmed piece of paper.
12. Gently push the roll unit back into the machine all the way until it stops.
Loading Cut Sheet Paper (Bypass)
When using cut sheets for print, load the cut sheet via the bypass (manual) feed table.
Notes
–
When loading paper of different type, size, or weight, change the paper settings before
printing. For information on how to do this, refer to
–
Paper of up to 78.7 in. (2,000 mm) in length can be loaded.
1.
Align both edges of the paper against the scale, and insert the paper until it is conveyed
automatically.
1-16
Configuring Paper Settings
Xerox® Wide Format IJP 2000
on page 1-19.
User Guide