Table of Contents
Advertisement
Assembling the contact pressure gauge
Only contact pressure gauges suitable for this valve type may be used.
The quick release valve has a check valve on the pressure gauge connection so that
the contact pressure gauge can also be assembled if the extinguishing agent con-
tainer is pressurized.
FIGURE 5-17: Assembling the contact pressure gauge
1. Contact pressure gauge
2. Pressure gauge connection
3. Quick release valve
5. Remove the plug at the pressure gauge connection.
6. Manually screw the contact pressure gauge into the pressure gauge connection M12 x 1 of the
quick release valve until it can no longer be turned easily.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
93
Advertisement
Table of Contents
