Assembly on the release device
1. Install the adapter at the output of the last pneumatic release device.
WARNING Risk of injury due to incorrect installation
Make sure that the safety device is positioned vertically pointing upward.
5.10 Mounting the blocking device
Personnel:
•
Authorized Distributor
•
Qualified electrician
Protective equipment:
•
Safety gloves
•
Safety footwear
5.10.1Mounting holder
FIGURE 5-29: Mounting blocking device holder
1. Cylinder screws
2. Hexagon nuts
3. Blocking device holder
104
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en