Table of Contents
Advertisement
Connecting the pipe to the cut ring union
FIGURE 5-46: Applying lubricant to the threads and cone
1. Union body
2. Lubricant
3. Union nut
a. thread (union body)
b. cone
c. thread (union nut)
4. Apply lubricant to the thread and cone of the union body as well as the thread of the union nut
to achieve a connection with non-destructive ease of movement.
FIGURE 5-47: Sliding the union nut and cut ring on the end of the pipe
1. Cut ring
2. Union nut
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
121
Advertisement
Table of Contents
