Table of Contents
Advertisement
5.14 Assembling the pneumatically operated limit switch
Personnel:
•
Authorized Distributor
•
Qualified electrician
Protective equipment:
•
Safety gloves
FIGURE 5-37: Assembling
1. Limit switch
2. Fittings
3. Fastening bores
4. Support
5. Cylinder
6. Button
7. Pressurized air connection
8. Pipeline
1. Screw the cylinder to the support using the two screws supplied.
2. Fasten the limit switch to the support using the two cylinder bolts M5 x 25, the washers and
the hexagon nuts supplied.
3. Fasten the support to a load-bearing part of the building using the two fastening bores and
the screws supplied.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
113
Advertisement
Table of Contents
