Manifold 200 Bar And 300 Bar, Dn50 - Viking Oxeo Installation And Maintenance Manual

4.4 Manifold 200 bar and 300 bar, DN50

FIGURE 4-3: Manifold with 2 inlets
FIGURE 4-4: Manifold with 3 inlets
Manifolds serve as a shared connection for the extinguishing agent containers on the pipe net-
work.
Manifolds are intended for a one-, two-, or three-row set-up for extinguishing agent containers.
Manifolds with 2 to 3 inlets are available for the one-, two-, or three-row set-ups.
A check valve is installed in each inlet to allow the extinguishing agent to flow in the correct flow
direction and to prevent it from flowing in the opposite direction. The manifolds are pressure
tested at the factory.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
41