Table of Contents
Advertisement
Connection with an alarm device
FIGURE 6-11: Wiring diagram with an alarm device
1. Fire detection and extinguishing control panel
2. Connection socket
3. Alarm device resistor
4. Terminating resistor:
5. Limit switches (shown here: the actuated limit switch with a mounted electrical release device)
5.1 - Normally open (NO) If no electrical release device is mounted, the contacts are open.
5.2 - Normally closed (NC); unused
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
141
Advertisement
Table of Contents
